Three bugs in v6 beta
Posted: Wed Dec 13, 2006 2:20 am
The following are some of the problems I have with PCTeX v6
(on two machines, Win 2K Pro SP4 with ATM De Luxe, Adobe PS
printer driver v5, and HP Laserjet 5MP printer).
(1) Initexing local format file
In Settings > Directories... > Additional TeX Input, I enter the path
to mylatex.tex, a local format file.
In Typeset > Initex > Other > Macro file name, I enter mylatex, hit
the INITeX button, and get the following response:
*** Typesetting mylatex ***
This is pdfeTeXk, Version 3.141592-1.20a-2.2 (Web2c 7.5.3) (INITEX)
%&-line parsing enabled.
output format initialized to DVI
! I can't find file `mylatex'.
<*> mylatex
\dump
Please type another input file name:
(2) Dvi viewer
(2.1) An existing dvi file opens at default rez of 116 DPI;
pressing once Up/Down Arrow, or Page Up/Down, keys makes the window
jump all the way from top to bottom and back to top of document, skipping the
middle part; the mouse scroll button produces a jittery
display, and two clicks of the wheel cover the whole hight of the
document.
(2.2) Hit the 'U' key, and the image is displayed magnified at 142
DPI; now all four Up/Down keys work properly (four hits needed to see
everything from top to bottom); and the mouse scroll wheel works
properly, too (each click shifts the display one line up/down), with
no jitter.
(2.3) Increase magnification once more, and at 162 DPI the vertical
scrolling is as it should be.
(2.4) By repeatedly hitting the 'D' key, the display falls back,
curiously enough, to 150 DPI, then to 120 DPI, to 90 DPI, and 60 DPI,
all the while with proper keys/mouse scrolling; within the session the
display never returns to the initial 116 DPI.
(3) N-up Printing
The request for 2-up printing is ignored; e.g., each page of a two page document is
printed normally on a separate sheet of paper, and a third sheet is
ejected with an empty 2-up frame printed on the left half. This is
a bug inherited from PCTeX v5. Note that 2-up printing works fine
in the old PCTeX v4.2.
(4) Elsewhere on this forum it was suggested that in cmex.tpm package
the mistyped fmex?.pfb file names be corrected to cmex?.pfb.
(on two machines, Win 2K Pro SP4 with ATM De Luxe, Adobe PS
printer driver v5, and HP Laserjet 5MP printer).
(1) Initexing local format file
In Settings > Directories... > Additional TeX Input, I enter the path
to mylatex.tex, a local format file.
In Typeset > Initex > Other > Macro file name, I enter mylatex, hit
the INITeX button, and get the following response:
*** Typesetting mylatex ***
This is pdfeTeXk, Version 3.141592-1.20a-2.2 (Web2c 7.5.3) (INITEX)
%&-line parsing enabled.
output format initialized to DVI
! I can't find file `mylatex'.
<*> mylatex
\dump
Please type another input file name:
(2) Dvi viewer
(2.1) An existing dvi file opens at default rez of 116 DPI;
pressing once Up/Down Arrow, or Page Up/Down, keys makes the window
jump all the way from top to bottom and back to top of document, skipping the
middle part; the mouse scroll button produces a jittery
display, and two clicks of the wheel cover the whole hight of the
document.
(2.2) Hit the 'U' key, and the image is displayed magnified at 142
DPI; now all four Up/Down keys work properly (four hits needed to see
everything from top to bottom); and the mouse scroll wheel works
properly, too (each click shifts the display one line up/down), with
no jitter.
(2.3) Increase magnification once more, and at 162 DPI the vertical
scrolling is as it should be.
(2.4) By repeatedly hitting the 'D' key, the display falls back,
curiously enough, to 150 DPI, then to 120 DPI, to 90 DPI, and 60 DPI,
all the while with proper keys/mouse scrolling; within the session the
display never returns to the initial 116 DPI.
(3) N-up Printing
The request for 2-up printing is ignored; e.g., each page of a two page document is
printed normally on a separate sheet of paper, and a third sheet is
ejected with an empty 2-up frame printed on the left half. This is
a bug inherited from PCTeX v5. Note that 2-up printing works fine
in the old PCTeX v4.2.
(4) Elsewhere on this forum it was suggested that in cmex.tpm package
the mistyped fmex?.pfb file names be corrected to cmex?.pfb.